Directions:For pre-treatment and neutralization of urine contamination and deposits

1. Always pre-test all cleaning solutions in an inconspicuous area for colorfastness prior to application.
2. Mix UPS 1 part solution with 4-6 parts warm or hot water depending upon severity of contamination.
3. Using a spray applicator, saturate spray the affected areas. Make sure that the UPS mixture comes in direct contact with the source material for most effective treatment.
4. Allow 3 to 10 minutes of dwell time.
5. On severe urine contamination, flush liberally and extract with a sub-surface extraction tool or wand. Extract area thoroughly.
6. For faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning.

Directions: For use as an acid detergent spotter

1. Always pre-test all cleaning solutions in an inconspicuous area for colorfastness prior to application.
2. Apply UPS straight to the affected area.
3. Allow 3 to 10 minutes of dwell time.
4. On large spills, flush liberally and extract with a sub-surface extraction tool or wand. Extract area thoroughly.
5. For faster drying, especially in humid environments, consider the use of an axial, centrifugal, or downdraft air mover after cleaning.